DJD Beating and Freeness Tester

The Schopper-Riegler test is designed to provide a measure of the rate at which a dilute suspension of pulp may be dewatered.

1. Introduction of Beating and Freeness Tester

Beating and Freeness Tester is used for the determination of the drainability of a pulp suspension in water in terms of the Schopper-Riegler (SR) number.

The Schopper-Riegler test is designed to provide a measure of the rate at which a dilute suspension of pulp may be dewatered. It has been shown that the drainability is related to the surface conditions and swelling of the fibres, and constitutes a useful index of the amount of mechanical treatment to which the pulp has been subjected
In principle, this method is applicable to all kinds of pulp in aqueous suspension. However, in practice, the Schopper-Riegler test provides acceptable results only if a sufficiently dense mat of fibres is formed on the wire screen. For this reason, the test is not recommended for some extremely short-fibred pulps, such as those from well-beaten hardwoods, as most of the fibres will pass through the wire screen, resulting in anomalous reduction of the SR number. The most reliable results are obtained within the range of 10 to 90 SR number.

DJD Beating and Freeness Tester

2. Advantages

non-corrosive

low maintenance

Easy to use and clean

Stainless steel

Robust design

 

3. Principle

Draining, through a fibre mat formed during the test on a wire screen, of a given volume of pulp in aqueous suspension into a funnel provided with a bottom and a side orifice. Collection of the discharge from the side orifice in a measuring cylinder, graduated in Schopper-Riegler numbers.

DJD Beating and Freeness Tester

4. Specifications

DJD-01
Measuring Range 1~100 SR
Division Value of Measuring Cylinder 1 SR
Orifice Draining Time 149±1s
Residual Volume (7.5~8.0)ml
Sealing Cone Raising Speed 100±10mm/s
Dimension 450*250*1200mm

 

DJD-02
Measuring Range 1~100 SR
Operation Auto Release
Sealing Adjustment Auto Sealing
Side Orifice Adjustment Adjustment button equipped, random setting of residual volume
Orifice Draining Time 149±1s
Residual Volume (7.5~8.0)ml
Sealing Cone Raising Speed 100±10mm/s
Dimension 410*360*760mm

 

DJD-03
Measuring Range 1~100 SR
Display Digital, drainage curve analysis
Resolution 0.1 SR
Operation Auto Release
Sealing Adjustment Auto Sealing
Side Orifice Adjustment Adjustment button equipped, random setting of residual volume
Orifice Draining Time 149±1s
Residual Volume (7.5~8.0)ml
Sealing Cone Raising Speed 100±10mm/s
Dimension 410*360*760mm

5. Standards

ISO 5267-1, GB/T 3332, QB/T 1054

DJD Beating and Freeness Tester

6. FAQs

What is the Schopper-Riegler number scale?
The scale on which a discharge of 1 000 ml corresponds to a SR number of zero and zero discharge to a SR number of100.

What is ‘stock’ in pulp beating freeness test?
aqueous suspension of disintegrated pulp.

 

If you have purchase needs, please contact us and Cell Instruments will give you satisfactory products.

DJD Beating and Freeness Tester

If you would like more information about this product, please feel free to contact us. Recommend other popular products for you: Tissue Thickness Tester

Tag

hu_HUMagyar