BTT-01 볼 점착 테스터

BTT-01 볼 점착 테스터 is for the measurement of the comparative tack of pressure-sensitive adhesives by a rolling ball. It’s an inclined trough equipped with a release lever at the top through which the ball gains downhill momentum. The ball is a 7⁄16-in. (11.1-mm) diameter steel ball.

2.Advantages of Ball Tack Test?

The rolling-ball tack test is fast, easy to run, and requires little investment in equipment and little operator training. This test is intended primarily for quality control use since it demonstrates good reproducibility within a single laboratory and ability to detect batch-to-batch variations accurately if adhesive film thickness is held constant. Rolling Ball Tack is not intended as an investigative tool since for most pressure sensitive adhesive applications rolling ball tack results do not correlate well with application tack requirements.

3.Test Principle of Ball Tack Tester 

A steel ball is released at the top of an incline, allowed to accelerate down the incline and roll on to a horizontal surface covered with a pressure-sensitive adhesive. Tack is determined by measuring the distance that the ball travels across the adhesive before stopping. There are two major retarding forces applied by the adhesive to the ball: (1) the adhesion between the ball and the adhesive, often called “grab,” and (2) the “plowing effect” or energy required to push the adhesive out of the ball’s path.

4.Description of Ball Tack Test: 

그리고 LTT-01 루프 점착 테스터 is indispensable in various industries where adhesive The adhesive side of sample is up, in line with the inclined trough. The specimen must be free of any wrinkles, creases, or splices. The end of the specimen opposite the incline shall be held to the table with tape or a weight.

Release the ball and allow it to roll to a stop on the adhesive. Measure the distance from the point where the ball initially contacts the adhesive to where the ball is in contact when it stops.

5.Specifications of Ball Tack Tester 

6.Standards of Ball Tack Tester:

PSTC-6, ASTM D3121, JIS Z0237, GB/T 4852.

7.구성:

a)Standard configuration: BTT-01 Ball Tack Tester, steel ball, manual

8.자주 묻는 질문

Q: 접착 산업에서 ‘점착'이란 단어는 어떤 의미인가요?

A: ‘점착력'은 접착제와 접착제가 낮은 압력 하에서 접촉한 직후 측정 가능한 강도의 결합을 형성할 수 있도록 하는 접착제의 특성입니다.

Q: What factors influence the rolling ball tack test results?

A: The rolling ball tack test results are often influenced by (1) adhesive film thickness, (2) bond of adhesive to backing, and (3) backing rigidity, so these factors must be carefully controlled for satisfactory comparisons.

Cell Instruments 는 최첨단 테스트 장비 제조업체일 뿐만 아니라 전 세계 기업의 성공을 위한 전략적 파트너로 자리매김했습니다. 다양한 전문 지식을 갖춘 전담 팀은 고객이 제품뿐 아니라 효율성, 제품 품질 및 전반적인 경쟁력을 향상시키는 종합적인 솔루션을 제공받을 수 있도록 끊임없이 협력하고 있습니다. 상담을 환영합니다!