CIT-01 Charpy and Izod Impact Tester är en slagprovningsmaskin av pekskärmstyp som huvudsakligen används för att mäta slagtåligheten hos icke-metalliska material som hårdplast, förstärkt nylon, glasfiber, keramik, gjuten sten, elektriska isoleringsmaterial etc.
It is an ideal choice for the chemical industry, scientific research institutions, and colleges Ideal testing equipment for colleges, quality inspection and other sectors.
Tillämpning
The Charpy and Izod impact tests are both used to measure the impact resistance of materials, but they differ in the way the specimen is clamped and the type of notch used. In the Charpy test, the specimen is supported at both ends, while in the Izod test, the specimen is clamped at one end. The notch in the Charpy test is V-shaped, while in the Izod test, it is U-shaped. Additionally, the Charpy test is typically used for larger, tougher materials, while the Izod test is often used for smaller, more brittle materials. Both tests provide valuable information about a material’s ability to withstand sudden impact.
Technical features
1. Both Charpy and Izod test combined.
2. PLC control and touch screen operated.
3. Chinese and English language switch.
4. 5 sample data storage and calculation of the average impact energy.
5. Simple operation and stable performance.
Specifikationer
| Items | Charpy Parameter | Izod Parameter |
| Impact Velocity | 3.8 m/s | 3.5 m/s |
| Effekt Energi | 7.5, 15, 25, 50J (choose one) | 1, 2.75, 5.5, 11J, 22J (choose one) |
| Impact Angle | 160° | 160° |
| Radius Of Striking Edge | R=2±0.5mm | R=0.8±0.2mm |
| Radius Of Curvature Of Anvils | R=1±0.1mm | R=1±0.1mm |
| Span Between The Supports | 40 mm, 62 mm, 70 mm, 95mm | vice jaw |
| Angle Of Striker Tip | 30°±1° | 75°±1° |
| Energy Absorbed | 0.005 | 0.005 |
| Dimension | 550*350*850mm |