Board 두께 테스터 is used for determining the single sheet thickness of corrugated fibreboard intended for use in the manufacture of packing cases. It’s applicable to all types of corrugated fibreboard.
원칙
Measurement of thickness of corrugated board under a specific static load by means of a high-precision Paper Thickness 테스터|、플라스틱 테스트.
설명
Paper 기판 두께 테스터has two plane, parallel, circular pressure faces, between which the corrugated board is placed for measurement.
The pressure exerted between the pressure faces during the thickness measurement shall be 20 kPa ± 0,5 kPa.
The two pressure faces form an integral part of the 테스터|、플라스틱 테스트 공장, such that one face is fixed (the anvil) and the other is movable, in a direction perpendicular to the plane of the fixed face, smoothly at a speed of 2 mm/s to 3 mm/s, one face shall be 35,7 mm + 0,3 mm in diameter and the second face shall be of such a size that it is in contact with the whole area of the other face when it reads zero. Thus, a circular region of a test piece 1000 mm²±20 mm²(10 cm²±0,2 cm²) in area, is subjected during the thickness measurement to the pressure exerted between the faces.
The instrument shall be sufficiently accurate to permit measurements to be made to the nearest 0,05 mm
장점
Cost-effective
Ultrasonic thickness gauges are a cost-effective way to support quality control, reliability, and condition monitoring.
User-friendly
Ultrasonic thickness gauges are user-friendly.
Non-destructive
Ultrasonic thickness measurement (UTM) is a non-destructive testing method.
Can measure coatings
Ultrasonic paint thickness gauges can measure the thickness of coatings on nonmetallic substrates.
Can measure non-magnetic materials
Hall-effect gauges, also called magnetic gauges, can accurately measure the thickness of nearly any non-magnetic material.
Can measure dry film thickness
Coating thickness gauges, also referred to as paint meters, can measure dry film thickness. Dry film thickness is a critical measurement in the coatings industry because of its impact on the coating process, quality, and cost.
기술적 특징
언제든지 0으로 초기화
전원 스위치 켜기/끄기
Measurement system conversion
0.001mm 해상도
기술 데이터
| 테스트 범위 | 0～20 mm |
| 해상도 | 0.001mm |
| 연락처 영역 | 1000±20 mm² |
| 접촉 압력 | 20±2kPa |
| 표면 평행도 측정 | ≤0.035mm |
| 디스플레이 오류 | ±0.05％ |
자주 묻는 질문
1. What is corrugated fibreboard?
Corrugated fibreboard is the board consisting of one or more sheets of fluted paper glued to a flat sheet of board or between several sheets.
2. What is single sheet thickness corrugated fibreboard？
It refers to the distance between one surface of a corrugated fibreboard and the other, measured under an applied static load.
구매가 필요한 경우 문의하기 그리고 Cell Instruments 만족스러운 제품을 제공합니다.
이 제품에 대한 자세한 정보가 필요하시면 언제든지 문의해 주세요. 다른 인기 제품을 추천해 주세요: 병 직각도 테스터, 종이 먼지 테스터, 앰플 파손력 테스트, 캡슐 경도 시험기, 디지털 원단 두께 테스터, 원단 두께 테스트 방법, 셜리 원단 두께 테스터, 병 직각도 테스터, 프리폼 수직성 테스터, 유리병 벽 두께 테스터, 종이 보드 테스터 도매업자, 플라스틱 필름 테스터 공장, 조직 두께 테스터 제조업체, 조직 두께 테스터 공급업체, 병 직각도 테스터 제조업체, 병 수직성 테스터 공장, 병 수직도 테스터 공급 업체, Bottle Perpendicularity Tester China, 병 직각도 테스터 서비스, 종이 먼지 테스터 공급업체, 종이 및 보드 두께 테스터 도매업자, 플라스틱 필름 테스트 공장, 종이 보드 테스터 제조업체