1. Introduction of Leak Detection Equipment
Leak Detection Equipment is an easy-to-use automatic type vacuum leak tester developed by Cell Instruments and has been welcomed for more than 10 years. It’s widely used for the seal integrity testing of various kinds of materials such as, packages, containers, bags, pipes, trays, capsules, cups, etc. Leak Detection Equipment is working in food, beverage, pharmaceutical, daily chemical, cosmetic and electronic industries, etc.
2. Advantages of LT-02 Leak Tester
1) Digital vacuum degree and test time setting;
2) Automatic process of vacuum increasing, holding, and decreasing
3) Anti-corrosion and anti-yellowing cast type acrylic vacuum chamber
4) Different chamber sizes and shapes available
5) Use compressed air to convert to vacuum. No vacuum pump required
6) Easy operation and maintenance
3. Test Principle
A test sample is placed into the vacuum chamber filled water and the headspace gas in chamber is evacuated by a venturi vacuum ejector. A pressure difference is created inside and outside the sample and leakage can be observed and identified when the sample is inflated
4. Applications
Flexible Packaging (such as pouches, bags, sachets etc.), Rigid Packaging (such as bottles, jars, containers, cans, capsules, etc.), Pharmaceutical Packaging (such as Blister, vials, syringes, IV bags, tubes etc.), Sprays, Aerosol cans etc.
5. Specifications
| Modèles | LT-02 |
| Plage de test | 0~-90 KPa |
| Taille de la chambre | Φ270*H210mm (standard utilisable à l'intérieur) |
| Φ364*H420mm (en option) | |
| Φ464*H330mm (en option) | |
| 400*300*300mm LWH (en option) | |
| Matériau de la chambre | Acrylique |
| Contrôle | Digital Auto |
| Affichage | LED |
| Puissance | Single phase, 110~220V 50/60Hz |
| Air comprimé | 0,7MPa (préparé par l'utilisateur) |
| Température de fonctionnement | Température ambiante |
6. Standards
ASTM D3078, GB/T 15171, ASTM D4991 (needs modification)
7. Configuration
a) Standard configuration: LT-02 Leak Tester control unit, chamber, air pipe, fuses, manual, calibration certificate, power cord.
b) Optional configuration: Non-Standard Chamber, air compressor
Si vous avez des questions sur le produit, n'hésitez pas à nous contacter. nous contacter, Cell Instruments will give you a satisfactory solution.
Si vous souhaitez obtenir plus d'informations sur ce produit, n'hésitez pas à nous contacter. Nous vous recommandons d'autres produits populaires : Testeur de conteneurs, Testeur de pouvoir de rétention, Solution de test pour l'emballage médical, Solution de test d'étanchéité et de résistance des joints