LT-02 Tester těsnosti

LT-02 Leak Tester is widely used for the seal integrity testing of various kinds of materials such as, packages, containers, bags, pipes, trays, capsules, cups, etc.

1. Introduction of Leak Detection Equipment

Leak Detection Equipment  is an easy-to-use automatic type vacuum leak tester developed by Cell Instruments and has been welcomed for more than 10 years. It’s widely used for the seal integrity testing of various kinds of materials such as, packages, containers, bags, pipes, trays, capsules, cups, etc. Leak Detection Equipment  is working in food, beverage, pharmaceutical, daily chemical, cosmetic and electronic industries, etc.

 

2. Advantages of LT-02 Leak Tester

1) Digital vacuum degree and test time setting;

2) Automatic process of vacuum increasing, holding, and decreasing

3) Anti-corrosion and anti-yellowing cast type acrylic vacuum chamber

4) Different chamber sizes and shapes available

5) Use compressed air to convert to vacuum. No vacuum pump required

6) Easy operation and maintenance

LT-02 Tester těsnosti 1

3. Test Principle

A test sample is placed into the vacuum chamber filled water and the headspace gas in chamber is evacuated by a venturi vacuum ejector. A pressure difference is created inside and outside the sample and leakage can be observed and identified when the sample is inflated

 

4. Applications

Pružné obaly (např. sáčky, tašky, pytlíky atd.), tuhé obaly (např. láhve, sklenice, kontejnery, plechovky, kapsle atd.), farmaceutické obaly (např. blistry, lahvičky, injekční stříkačky, infuzní vaky, zkumavky atd.), spreje, aerosolové plechovky atd.

LT-02 Tester těsnosti 2

5. Specifications

Modely LT-02
Testovací rozsah 0~-90 KPa
Velikost komory Φ270*H210mm (standardní použitelný vnitřek)
Φ364*H420mm (volitelně)
Φ464*H330mm (volitelně)
400*300*300mm LWH (optional)
Materiál komory Akryl
Kontrola Digital Auto
Zobrazit LED
Power Jednofázový, 110~220V 50/60Hz
Stlačený vzduch 0,7 MPa (připraveno uživatelem)
Pracovní teplota Pokojová teplota

6. Standards

ASTM D3078, GB/T 15171, ASTM D4991 (needs modification)

 

7. Configuration

a) Standard configuration: LT-02 Leak Tester control unit, chamber, air pipe, fuses, manual, calibration certificate, power cord.

b) Optional configuration: Non-Standard Chamber, air compressor

Any questions about the product, please feel free to kontaktujte násCell Instruments will give you a satisfactory solution.

LT-02 Tester těsnosti

Pokud máte zájem o další informace o tomto produktu, neváhejte nás kontaktovat. Doporučujeme vám další oblíbené produkty: Tester kontejnerůTester přídržného výkonuŘešení pro testování zdravotnických obalůŘešení pro testování těsnosti a těsnosti

Štítek