1. Zavedení hot tack Testing Equipment
Hot Tack Testing Equipment measures the strength of heat seals formed between thermoplastic surfaces immediately after the seal has been made and before it cools to room temperature. Hot Tack Testing Equipment also has functions of tepelné těsnění, tensile and peeling force test.
2. Technical Features
1) Able to perform hot tack, heat seal, peeling and tensile test in one.
2) Precious and stable P.I.D. temperature controller
3) 7-inch HMI touching screen for easy operation
4) PLC controlled
5) Aluminum encapsulated sealing jaws
6) Testing speed adjustable
7) Auto zeroing, overload and over travel protection
8) RS 232 port and professional software(optional)
3. Specifikace
| Teplota těsnění. | Okolní prostředí ~ 250 ℃ |
| Temp Accuracy | ±0.2℃ |
| Dwell Time | 0.1~9999s(Heat Seal ) |
| Dwell Time | 0.1~9999s(Hot Tack ) |
| Těsnicí tlak | 0.15MPa~0.7MPa |
| Sealing Jaws | 50mmx10mm Teflon Coated |
| Jaws Heating | Double Heating |
| Load Cell | 200N(Optional:30N50N100N, etc) |
| Přesnost | 0.5 F.S. |
| Rozlišení | 0.01N |
| Power | 220V, 50 HZ |
4. Standards
ASTM F1921, ASTM F2029, GB/T 34445
5. Configuration
a) Standardní konfigurace: Hot Tack Testing Equipment, gumová podložka, teflonová páska, pojistky, příručka, kalibrační certifikát, napájecí kabel.
b) Volitelná konfigurace: Nestandardní čelisti, port RS 232, linka COM, software, vzduchový kompresor
6. Advantages of hot tack testing:
It quantifies the impact of dump loading a bag on the hot seal integrity on a vertical form fill and seal machine.
Higher hot tack and seal strength at lower temperatures is advantageous.
Adding 30% LLDPE compound to LDPE films significantly enhances hot-tack seal strength.
Pokud máte potřebu nákupu, prosím kontaktujte nás a Cell Instruments vám poskytne uspokojivé produkty.
