1. Introductie van hot tack Testing Equipment
Hot Tack Testing Equipment measures the strength of heat seals formed between thermoplastic surfaces immediately after the seal has been made and before it cools to room temperature. Hot Tack Testing Equipment also has functions of hitteverzegeling, tensile and peeling force test.
2. Technische functies
1) Able to perform hot tack, heat seal, peeling and tensile test in one.
2) Precious and stable P.I.D. temperature controller
3) 7-inch HMI touching screen for easy operation
4) PLC controlled
5) Aluminum encapsulated sealing jaws
6) Testing speed adjustable
7) Auto zeroing, overload and over travel protection
8) RS 232 port and professional software(optional)
3. Specificaties
| Afdichtingstemp. | Omringend~250℃ |
| Temp Accuracy | ±0.2℃ |
| Dwell Time | 0.1~9999s(Heat Seal ) |
| Dwell Time | 0.1~9999s(Hot Tack ) |
| Afdichtingsdruk | 0.15MPa~0.7MPa |
| Sealing Jaws | 50mmx10mm Teflon Coated |
| Jaws Heating | Double Heating |
| Load Cell | 200N(Optional:30N50N100N, etc) |
| Nauwkeurigheid | 0.5 F.S. |
| Resolutie | 0.01N |
| Stroom | 220V, 50 HZ |
4. Normen
ASTM F1921, ASTM F2029, GB/T 34445
5. Configuratie
a) Standaardconfiguratie: Hot Tack Testing Equipment, rubberen pad, teflontape, zekeringen, handleiding, kalibratiecertificaat, netsnoer.
b) Optionele configuratie: Niet-standaardbekken, RS 232-poort, COM-lijn, software, luchtcompressor
6. Advantages of hot tack testing:
It quantifies the impact of dump loading a bag on the hot seal integrity on a vertical form fill and seal machine.
Higher hot tack and seal strength at lower temperatures is advantageous.
Adding 30% LLDPE compound to LDPE films significantly enhances hot-tack seal strength.
Als u aankopen wilt doen, kunt u contact met ons opnemen en Cell Instruments zal je bevredigende producten geven.
