Board Tester di spessore is used for determining the single sheet thickness of corrugated fibreboard intended for use in the manufacture of packing cases. It’s applicable to all types of corrugated fibreboard.
Principio
Measurement of thickness of corrugated board under a specific static load by means of a high-precision Paper Thickness Tester|Test di materie plastiche.
Description
Paper Board Thickness Testerhas two plane, parallel, circular pressure faces, between which the corrugated board is placed for measurement.
The pressure exerted between the pressure faces during the thickness measurement shall be 20 kPa ± 0,5 kPa.
The two pressure faces form an integral part of the Tester, fabbrica di test sulle materie plastiche, such that one face is fixed (the anvil) and the other is movable, in a direction perpendicular to the plane of the fixed face, smoothly at a speed of 2 mm/s to 3 mm/s, one face shall be 35,7 mm + 0,3 mm in diameter and the second face shall be of such a size that it is in contact with the whole area of the other face when it reads zero. Thus, a circular region of a test piece 1000 mm²±20 mm²(10 cm²±0,2 cm²) in area, is subjected during the thickness measurement to the pressure exerted between the faces.
The instrument shall be sufficiently accurate to permit measurements to be made to the nearest 0,05 mm
Vantaggi
Cost-effective
Ultrasonic thickness gauges are a cost-effective way to support quality control, reliability, and condition monitoring.
User-friendly
Ultrasonic thickness gauges are user-friendly.
Non-destructive
Ultrasonic thickness measurement (UTM) is a non-destructive testing method.
Can measure coatings
Ultrasonic paint thickness gauges can measure the thickness of coatings on nonmetallic substrates.
Can measure non-magnetic materials
Hall-effect gauges, also called magnetic gauges, can accurately measure the thickness of nearly any non-magnetic material.
Can measure dry film thickness
Coating thickness gauges, also referred to as paint meters, can measure dry film thickness. Dry film thickness is a critical measurement in the coatings industry because of its impact on the coating process, quality, and cost.
Caratteristiche tecniche
Reset ZERO at any point
ON/OFF power switch
Measurement system conversion
0.001mm resolution
Dati tecnici
| Campo di prova | 0～20 mm |
| Risoluzione | 0.001mm |
| Contact Area | 1000±20 mm² |
| Contact Pressure | 20±2kPa |
| Measuring surface parallelism | ≤0.035mm |
| Display error | ±0.05％ |
FAQ
1. What is corrugated fibreboard?
Corrugated fibreboard is the board consisting of one or more sheets of fluted paper glued to a flat sheet of board or between several sheets.
2. What is single sheet thickness corrugated fibreboard？
It refers to the distance between one surface of a corrugated fibreboard and the other, measured under an applied static load.
Se avete esigenze di acquisto, vi preghiamo di contattateci e Cell Instruments vi darà prodotti soddisfacenti.
Se desiderate maggiori informazioni su questo prodotto, non esitate a contattarci. Raccomandiamo altri prodotti popolari per voi: Tester di perpendicolarità per bottiglie, Tester per lo sporco di carta, test della forza di rottura delle fiale, Tester di durezza per capsule, tester digitale per lo spessore del tessuto, metodo di prova dello spessore del tessuto, tester di spessore per tessuti shirley, Tester di perpendicolarità per bottiglie, tester di perpendicolarità delle preforme, tester per lo spessore delle pareti delle bottiglie di vetro, Grossista di tester per cartone di carta, Fabbrica di tester per film plastici, Produttore di tester per lo spessore dei tessuti, Fornitore del tester di spessore del tessuto, Produttore del tester di perpendicolarità per bottiglie, Bottle Perpendicularity Tester factory, Fornitore del tester di perpendicolarità per bottiglie, Bottle Perpendicularity Tester China, Servizi di tester di perpendicolarità per bottiglie, Fornitore del tester per lo sporco di carta, Grossista di tester di spessore per carta e cartone, Fabbrica di test per film plastici, Produttore di tester per cartoni