1. Introduction of Leak Detection Equipment
Leak Detection Equipment is an easy-to-use automatic type vacuum leak tester developed by Cell Instruments and has been welcomed for more than 10 years. It’s widely used for the seal integrity testing of various kinds of materials such as, packages, containers, bags, pipes, trays, capsules, cups, etc. Leak Detection Equipment is working in food, beverage, pharmaceutical, daily chemical, cosmetic and electronic industries, etc.
2. Advantages of LT-02 Leak Tester
1) Digital vacuum degree and test time setting;
2) Automatic process of vacuum increasing, holding, and decreasing
3) Anti-corrosion and anti-yellowing cast type acrylic vacuum chamber
4) Different chamber sizes and shapes available
5) Use compressed air to convert to vacuum. No vacuum pump required
6) Easy operation and maintenance
3. Principio de prueba
A test sample is placed into the vacuum chamber filled water and the headspace gas in chamber is evacuated by a venturi vacuum ejector. A pressure difference is created inside and outside the sample and leakage can be observed and identified when the sample is inflated
4. Applications
Envases flexibles (como bolsas, bolsitas, sobres, etc.), envases rígidos (como botellas, tarros, contenedores, latas, cápsulas, etc.), envases farmacéuticos (como blísteres, viales, jeringuillas, bolsas intravenosas, tubos, etc.), aerosoles, latas de aerosol, etc.
5. Especificaciones
| Modelos | LT-02 |
| Alcance de la prueba | 0~-90 KPa |
| Tamaño de la cámara | Φ270*H210mm (Interior estándar utilizable) |
| Φ364*H420mm (Opcional) | |
| Φ464*H330mm (Opcional) | |
| 400*300*300mm LWH (optional) | |
| Material de la cámara | Acrílico |
| Controlar | Auto Digital |
| Mostrar | LED |
| Potencia | Monofásico, 110~220V 50/60Hz |
| Aire comprimido | 0,7MPa (Preparado por el usuario) |
| Temperatura de trabajo | Temperatura ambiente |
6. Normas
ASTM D3078, GB/T 15171, ASTM D4991 (needs modification)
7. Configuración
a) Standard configuration: LT-02 Leak Tester control unit, chamber, air pipe, fuses, manual, calibration certificate, power cord.
b) Optional configuration: Non-Standard Chamber, air compressor
Any questions about the product, please feel free to Contacto, Cell Instruments le dará una solución satisfactoria.
Si desea más información sobre este producto, no dude en ponerse en contacto con nosotros. Le recomendamos otros productos populares: Comprobador de contenedores, Comprobador de fuerza de retención, Solución de comprobación de envases médicos, Leak and Seal Strength Tester solution