Тестер за течове LT-02

LT-02 Leak Tester is widely used for the seal integrity testing of various kinds of materials such as, packages, containers, bags, pipes, trays, capsules, cups, etc.

1. Introduction of Leak Detection Equipment

Leak Detection Equipment  is an easy-to-use automatic type vacuum leak tester developed by Cell Instruments and has been welcomed for more than 10 years. It’s widely used for the seal integrity testing of various kinds of materials such as, packages, containers, bags, pipes, trays, capsules, cups, etc. Leak Detection Equipment  is working in food, beverage, pharmaceutical, daily chemical, cosmetic and electronic industries, etc.

 

2. Advantages of LT-02 Leak Tester

1) Digital vacuum degree and test time setting;

2) Automatic process of vacuum increasing, holding, and decreasing

3) Anti-corrosion and anti-yellowing cast type acrylic vacuum chamber

4) Different chamber sizes and shapes available

5) Use compressed air to convert to vacuum. No vacuum pump required

6) Easy operation and maintenance

LT-02 Тестер за течове 1

3. Test Principle

A test sample is placed into the vacuum chamber filled water and the headspace gas in chamber is evacuated by a venturi vacuum ejector. A pressure difference is created inside and outside the sample and leakage can be observed and identified when the sample is inflated

 

4. Applications

Flexible Packaging (such as pouches, bags, sachets etc.), Rigid Packaging (such as bottles, jars, containers, cans, capsules, etc.), Pharmaceutical Packaging (such as Blister, vials, syringes, IV bags, tubes etc.), Sprays, Aerosol cans etc.

LT-02 Тестер за течове 2

5. Specifications

Models LT-02
Диапазон на изпитване 0~-90 KPa
Chamber Size Φ270*H210mm (Standard Inside Usable)
Φ364*H420mm (Optional)
Φ464*H330mm (Optional)
400*300*300mm LWH (optional)
Chamber Material Acrylic
Control Digital Auto
Display LED
Захранване Single phase, 110~220V 50/60Hz
Compressed Air 0.7MPa (Prepared by user)
Working Temperature Room Temperature

6. Standards

ASTM D3078, GB/T 15171, ASTM D4991 (needs modification)

 

7. Configuration

a) Standard configuration: LT-02 Leak Tester control unit, chamber, air pipe, fuses, manual, calibration certificate, power cord.

b) Optional configuration: Non-Standard Chamber, air compressor

Any questions about the product, please feel free to свържете се с насCell Instruments will give you a satisfactory solution.

Тестер за течове LT-02

Ако желаете да получите повече информация за този продукт, моля, не се колебайте да се свържете с нас. Препоръчваме ви и други популярни продукти: Тестер на контейнериТестер за мощност на задържанеРешение за тестване на медицински опаковкиLeak and Seal Strength Tester solution

Tag

bg_BGБългарски