جهاز اختبار التسرب LT-02

LT-02 Leak Tester is widely used for the seal integrity testing of various kinds of materials such as, packages, containers, bags, pipes, trays, capsules, cups, etc.

1. Introduction of Leak Detection Equipment

Leak Detection Equipment  is an easy-to-use automatic type vacuum leak tester developed by Cell Instruments and has been welcomed for more than 10 years. It’s widely used for the seal integrity testing of various kinds of materials such as, packages, containers, bags, pipes, trays, capsules, cups, etc. Leak Detection Equipment  is working in food, beverage, pharmaceutical, daily chemical, cosmetic and electronic industries, etc.

 

2. Advantages of LT-02 Leak Tester

1) Digital vacuum degree and test time setting;

2) Automatic process of vacuum increasing, holding, and decreasing

3) Anti-corrosion and anti-yellowing cast type acrylic vacuum chamber

4) Different chamber sizes and shapes available

5) Use compressed air to convert to vacuum. No vacuum pump required

6) Easy operation and maintenance

جهاز اختبار التسرب LT-02 1

3. Test Principle

A test sample is placed into the vacuum chamber filled water and the headspace gas in chamber is evacuated by a venturi vacuum ejector. A pressure difference is created inside and outside the sample and leakage can be observed and identified when the sample is inflated

 

4. Applications

Flexible Packaging (such as pouches, bags, sachets etc.), Rigid Packaging (such as bottles, jars, containers, cans, capsules, etc.), Pharmaceutical Packaging (such as Blister, vials, syringes, IV bags, tubes etc.), Sprays, Aerosol cans etc.

جهاز اختبار التسرب LT-02 2

5. Specifications

Models LT-02
نطاق الاختبار 0~-90 KPa
Chamber Size Φ270*H210mm (Standard Inside Usable)
Φ364*H420mm (Optional)
Φ464*H330mm (Optional)
400*300*300mm LWH (optional)
Chamber Material Acrylic
Control Digital Auto
Display LED
الطاقة Single phase, 110~220V 50/60Hz
Compressed Air 0.7MPa (Prepared by user)
Working Temperature Room Temperature

6. Standards

ASTM D3078, GB/T 15171, ASTM D4991 (needs modification)

 

7. Configuration

a) Standard configuration: LT-02 Leak Tester control unit, chamber, air pipe, fuses, manual, calibration certificate, power cord.

b) Optional configuration: Non-Standard Chamber, air compressor

Any questions about the product, please feel free to اتصل بناCell Instruments will give you a satisfactory solution.

جهاز اختبار التسرب LT-02

إذا كنت ترغب في الحصول على مزيد من المعلومات حول هذا المنتج، فلا تتردد في الاتصال بنا. نوصي بمنتجات شائعة أخرى لك: جهاز اختبار الحاوياتجهاز اختبار الطاقة القابضةMedical Packaging Tester solutionLeak and Seal Strength Tester solution

Tag

arالعربية