{"id":2878,"date":"2026-02-05T01:34:54","date_gmt":"2026-02-05T01:34:54","guid":{"rendered":"https:\/\/www.materialstests.com\/products\/gft-02-gelbo-flex-tester\/"},"modified":"2026-02-05T01:34:54","modified_gmt":"2026-02-05T01:34:54","slug":"gft-02-gelbo-flex-tester","status":"publish","type":"products","link":"https:\/\/www.materialstests.com\/th\/products\/gft-02-gelbo-flex-tester.html","title":{"rendered":"GFT-02 Gelbo Flex Tester"},"content":{"rendered":"

1. Introduction of\u00a0Gelbo Flex Tester<\/a><\/h2>\n

Gelbo Flex Tester<\/strong>\u00a0is a three-station\u00a0Flex Durability Tester<\/a>, which is used to evaluate the flex resistance property of flexible barrier materials. It\u2019s valuable procedure in determining the resistance of flexible packaging materials to flex-formed pinholes.<\/p>\n

One key property of flexible barrier material is the resistance against repetitive strain, which is called flex durability, or Gelboflex. Intertek operates specialized Gelbo-flex equipment to determine the flex resistance, also called the flex tester.<\/p>\n

Gelbo Flex Tester designed to measure flexible barrier materials for flex durability to\u00a0ASTM F392<\/strong>.\u00a0The\u00a0\u00a0Gelbo Flex Tester\u00a0<\/strong>is a microprocessor controlled system, with a user controllable pre-set method programmed for\u00a0ASTM F392<\/strong>.<\/p>\n

Gelbo Flex Testing<\/strong>\u00a0is intended to subject a target material to the fatigue of repetitive twisting, crunching, and flexing motions under controlled conditions. The material can then be examined for the presence of any flex cracks or pinholes. To perform a Gelbo test, packaging material is repeatedly twisted and crushed and then evaluated for flex failure. The flexing action performed during the test consists of a twisting motion combined with a horizontal compression motion that provides repetitive strain to test the flex resistance of the flexible barrier material for the entirety of the test. Flex failure is typically determined by the appearance of pinholes or integrity failures in one or more plies of a multi-ply structure, or the breakdown of barrier properties. The commonly used standard for Gelbo flex testing is ASTM F392, though it can vary.<\/p>\n

The\u00a0Gelbo Flex Tester<\/strong>\u00a0is a critical piece of equipment used in the testing of packaging materials, particularly flexible films and bags. It performs the\u00a0Gelbo Flex Test<\/strong>, which simulates the stresses and strains that packaging might experience during handling, transportation, and storage. This test helps manufacturers evaluate the durability and resistance of the materials to flexing and folding, ensuring that the packaging can protect the contents effectively throughout its lifecycle. By using a\u00a0Gelbo Flex Tester<\/strong>, companies can identify potential weaknesses in their packaging designs and make necessary improvements to enhance product safety and consumer satisfaction.<\/p>\n

\"GFT-02<\/a><\/p>\n

2. Advantages of Gelbo Flex Tester<\/h2>\n

PLC controlled and 7-inch HMI touch screen operated<\/p>\n

High test efficiency of 3 test stations<\/p>\n

Test conditions A, B, C, D and E can be directly selected<\/p>\n

Sample metal clamps provided<\/p>\n

\"GFT-02<\/p>\n

3. Test Principle of\u00a0Gelbo Flex Tester<\/h2>\n

Gelbo Flex Tester<\/strong>\u00a0consists of three pairs of 90 mm [3.5 in.] diameter upper and lower mandrels. They space at 180 mm [7 in.] from face-to-face at the starting position (that is, maximum distance) of the stroke.<\/p>\n

Mandrels contain circular vents to prevent pressurization of samples. The specimen supporting shoulders on the mandrels are 13 mm wide.<\/p>\n

For the full or maximum stroke (condition A~D), the lower mandrels give a twisting motion of 440\u00b0 in the first 90 mm [3.5 in.] of the stroke of the upper mandrels. Then the upper mandrels perform a straight horizontal motion of 65 mm [2.5 in.], so that at the closed position the mandrels are 25 mm apart. The motion of the mandrels is reciprocal with a full cycle consisting of the downward and return strokes.<\/p>\n

For the\u00a0partial flex<\/strong>, Condition E, the upper mandrels travel only 80 mm [3.25 in.] of the 180 mm [7 in.] spacing. Only approximately 90 % of the twisting stroke of upper mandrels are utilized resulting in a twisting motion of 400\u00b0.<\/p>\n

The entire cycle occurs at a speed of 45 cycles per minute.<\/p>\n

The various flex conditioning levels can be selected directly from screen.<\/p>\n

Condition A\u2014Full flex for 1 h (that is, 2700 cycles).<\/p>\n

Condition B\u2014Full flex for 20 min (that is, 900 cycles).<\/p>\n

Condition C\u2014Full flex for 6 min (that is, 270 cycles).<\/p>\n

Condition D\u2014Full flex for 20 cycles.<\/p>\n

Condition E\u2014Partial flex for 20 cycles.<\/p>\n

\"GFT-02<\/p>\n

4. Gelbo Flex Tester Application<\/h2>\n

Flexible Films, Composite Films and Coating Films<\/strong><\/p>\n

Including plastic films, sheets and composite films e.g. composite films, aluminized films, aluminum plastic composite films, nylon films and coating films for food or drug packages<\/p>\n

Paper Materials<\/strong><\/p>\n

Test the\u00a0Flex Durability<\/a>\u00a0of paper materials<\/p>\n

5.\u00a0 Gelbo Flex Tester Specifications<\/h2>\n
\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n
Flex Frequency<\/td>\n45 cpm<\/td>\n<\/tr>\n
Flex Angle<\/td>\n440\u00b0 (90 mm) or 400\u00b0 (80 mm)<\/td>\n<\/tr>\n
Capacity<\/td>\n3.5 N.m<\/td>\n<\/tr>\n
Horizontal Stroke<\/td>\n155 mm or 80 mm<\/td>\n<\/tr>\n
Test Stations<\/td>\n3<\/td>\n<\/tr>\n
Sample Size<\/td>\n280 mm x 200 mm<\/td>\n<\/tr>\n
Power<\/td>\n110~220V<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

6. Gelbo Flex Tester Standards<\/h2>\n

ASTM F392 Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability<\/p>\n

YY\/T 0681.12 Test methods for sterile medical device package Part 12: Flex durability of flexible barrier films<\/p>\n

\"GFT-02<\/p>\n

7. Configuration of\u00a0Gelbo Flex Tester<\/h2>\n

a) Standard configuration:\u00a0Gelbo Flex Tester<\/strong>, Sample Clamp, fuses, manual, power cord.<\/p>\n

b) Optional configuration: Sample Clamp, adhesive tape<\/p>\n

 <\/p>\n

8. FAQs of\u00a0Gelbo Flex Tester<\/h2>\n

Q: How the samples are evaluated after ASTM F392 flex durability test?<\/p>\n

A: Permeation testing using gas or water vapor, presence of pinholes<\/p>\n

 <\/p>\n

If you have any questions about the\u00a0\u00a0Gelbo Flex Tester<\/strong>, you can\u00a0contact us<\/a>\u00a0at any time!\u00a0Cell Instruments<\/a>\u00a0gives you a satisfactory solution.<\/p>\n

\"GFT-02<\/a><\/p>","protected":false},"excerpt":{"rendered":"

1. Introduction of\u00a0Gelbo Flex Tester Gelbo Flex Tester\u00a0is a three-station\u00a0Flex Durability Tester, which is used to evaluate the flex resistance property of flexible barrier materials. It\u2019s valuable procedure in determining the resistance of flexible packaging materials to flex-formed pinholes. One key property of flexible barrier material is the resistance against repetitive strain, which is called […]<\/p>","protected":false},"featured_media":0,"parent":0,"template":"","meta":{"_acf_changed":false},"products-categories":[1467,1310],"productstags":[],"standard-category":[],"class_list":["post-2878","products","type-products","status-publish","hentry","products-categories-flex-durability-tester","products-categories-plastic-film-tester"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.materialstests.com\/th\/wp-json\/wp\/v2\/products\/2878","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.materialstests.com\/th\/wp-json\/wp\/v2\/products"}],"about":[{"href":"https:\/\/www.materialstests.com\/th\/wp-json\/wp\/v2\/types\/products"}],"version-history":[{"count":0,"href":"https:\/\/www.materialstests.com\/th\/wp-json\/wp\/v2\/products\/2878\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.materialstests.com\/th\/wp-json\/wp\/v2\/media?parent=2878"}],"wp:term":[{"taxonomy":"products-categories","embeddable":true,"href":"https:\/\/www.materialstests.com\/th\/wp-json\/wp\/v2\/products-categories?post=2878"},{"taxonomy":"productstags","embeddable":true,"href":"https:\/\/www.materialstests.com\/th\/wp-json\/wp\/v2\/productstags?post=2878"},{"taxonomy":"standard-category","embeddable":true,"href":"https:\/\/www.materialstests.com\/th\/wp-json\/wp\/v2\/standard-category?post=2878"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}